Panasonic KX-TVS95 Installation Manual page 278

B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS
Table B-7
Parameter Value Range
Authorization for 1. Yes
2. No
Auto Forwarding
Mailbox
Number
Delay Time
00:05 to 99:59
Forwarding 1. Copy
2. Move
Mode
278 Installation Manual
(Default)
If set to "Yes", the VPS automatically forwards messages that
have not been accessed for a specific length of time to another
(No) mailbox. The sub-parameters to be set for this feature include
Mailbox Number, Delay Time, and Forwarding Mode. If set to
"No", sub-parameters cannot be assigned.
2-5 digits Specifies the mailbox to which the messages will be
(None) forwarded.
Note
The numbers of the System Group Distribution List cannot
be specified as the destination.
(h) (min) Specifies the length of time in hours and minutes that the VPS
must wait before forwarding unretrieved messages. The
maximum delay time is 99 h, 59 min.
(00:30)
Note
The delay time must be less than the New Message
Retention Time, or else messages will be deleted before
being forwarded.
Specifies if forwarded messages are to be retained in the
original mailbox. When set to "Copy", copies of the messages
(Move) are retained in the original mailbox after forwarding. When set
to "Move", messages are forwarded to the receiving mailbox
and are not retained at the original location.
Description/Function