Table of Contents
Advertisement
5.1 STARTING UP
5.
Port Service Setting
Screen output:
Quick Setup- Port Service Setting
Incoming Call Services for all ports (Day/Night) can be defined by this setting. Default
values for all ports (Day/Night) are "Automated Attendant Service (Custom 1)". To
select other incoming call services, go to "Setting Ports".
6.
Password Setting
Screen output:
Quick Setup-Password Setting
You can assign the System Administrator Password and System Reset/Clear
Password in this screen, if necessary.
IMPORTANT
•
We strongly recommend that you set the password to 10 characters for
maximum protection against hackers.
•
Do not carelessly reveal the password to other persons.
•
Please change the password periodically (for instructions, see 7.2.3 Set
Password (PASS) in 7.2 UTILITY COMMANDS.)
To go to the next screen without assigning the password, Press ENTER.
148
Installation Manual
All ports are currently set up to handle callers with standard automated atten-
dant operation, day and night mode, using the Custom Service feature (Custom
1). You can change the operation to standard Voice Mail (Custom 2) or leave it
as automated attendant. If necessary, Custom 1 and Custom 2 can be modified
under the menu 'Program -> Service Setting -> Custom Service.'
Day Mode
PORT 1
Auto. Attend.
PORT 2
Auto. Attend.
A: Auto. Attend., V: Voice Mail, S: Next Screen
Auto. Attend. (using Custom 1), Voice Mail (using Custom 2)
System Administrator Password
(Maximum 10 characters)
NEW PASSWORD : =
VERIFICATION : =
System Reset/Clear Password
(Maximum 10 characters)
NEW PASSWORD : =
VERIFICATION : =
Night Mode
Auto. Attend.
Auto. Attend.
Advertisement
Table of Contents
Troubleshooting
