Table of Contents
Advertisement
4.4 KX-TDA/KX-TAW SERIES PROGRAMMING FOR DIGITAL INTEGRATION
TEST: Press the INTERCOM button and then VM(DPT) floating group
number which you assign in "1. Assignment of VM(DPT) Group".
If the VPS answers, you have a DPT connection.
Set the DIP switch to position 0 after initialization is complete.
The required programming is complete and the VPS and KX-TDA/KX-TAW should be able
to communicate through Digital Integration.
When running the Quick Setup command (Section 5 CUSTOMIZING THE SYSTEM) from
the VPS, the PBX transmits the station information automatically. This saves time when
programming the VPS.
Installation Manual
105
Advertisement
Table of Contents
Troubleshooting
