Panasonic KX-TVS95 Installation Manual page 87

Extension
group 7
7
8
KX-TA624
15
16
Extension
group 8
From the SYS-PGM NO ?screen:
a)
Enter [130] (for VPS1) or [131] (for VPS2).
b)
Press the NEXT button (SP-PHONE).
Screen output: Disable
c)
Press the SELECT button (AUTO-ANSWER).
Screen output: Port 7 or Port 15
d)
To assign 2 jacks, Press the SELECT button (AUTO-ANSWER) again.
Screen output: Port 7& 8 or Port 15&16
To assign 1 jack, skip this step.
e)
Press STORE.
f)
Press END (HOLD).
Conditions: The lowest jack (jack 07 or jack 15) entered here must
be connected to the Port 1 of the VPS.
To change the current assignment from "Port 7" to
"Port 7 & 8", you must first change it to "Disable".
Likewise, if you want to change it from "Port 7 & 8" to
"Port 7", you must first change it to "Disable". If the
current assignment is already "Disable" , you can
make a change in 1 step. This condition also applies
to System Program [131].
When "Port 7 & 8" is selected in program [130],
extension jack numbers 07 and 08 will be in
extension group 7 automatically. Likewise, when
"Port 15& 16" is selected in program [131], extension
jack numbers 15 and 16 will be in extension group 8
automatically. Also the Station Hunting type is set as
"Circular" automatically in each of these 2 extension
groups.
5.
Select the appropriate outside (CO) Line feature settings depending on how your
customer plans to use the VPS: A) to answer all incoming calls, B) as an operator backup,
or C) to only answer calls not answered by user extensions.
4.2 CONNECTING THE VPS WITH THE PANASONIC KX-TA624
VPS1
VPS2
Port 1
Port 2
Port 1
Port 2
Installation Manual 87