Live Call Screening Private/Hands-Free Mode Assignment - Panasonic KX-TVS95 Installation Manual

4.7 DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TDA/KX-TAW
4.7.5 Live Call Screening Private/Hands-Free Mode
Assignment
This program assigns a VPS response for when a message is being left in a mailbox. It
determines whether an alert tone is sent and whether the recorded message is played through
the built-in speaker of the extension. The default mode is hands-free. (This is station level
programming and should be done at each individual phone.) PC programming is also available
(see 4.7.6 Live Call Screening Assignment via PC Programming).
1.
Enter Station (Personal) Programming:
With the phone on-hook, Press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2.
Enter [25].
Screen output: LCS Private
3.
Press the ENTER button.
4.
Press the SELECT button until the desired selection is displayed.
Screen output: Hands-Free/Private
5.
Press STORE.
6.
Press the PROGRAM button or lift the handset to exit the Station (Personal)
Programming mode.
7.
Repeat these steps for each telephone.
A single-line telephone that is connected to the same extension as a proprietary telephone
can also be used to monitor an incoming message. Be sure that Live Call Screening on the
connected proprietary telephone has been activated. This feature is useful when you are using
a cordless telephone. The handset sounds an alert tone to let you know that a message is
being recorded. To intercept the call, hang up and go off-hook.
132 Installation Manual