Panasonic KX-TVS95 Installation Manual page 223

Table A-1
FEATURE
Caller ID enables a subscriber to call back a message
sender with the Caller ID number attached to
Callback
the message.
(APT/DPT
Integration Only)
Caller ID Call allows the System Administrator to assign up
to 200 Caller ID numbers and program the
Routing
route for the calls from these assigned
(APT/DPT
numbers to the desired extension, mailbox
Integration Only)
(including System Group Distribution List) or
Custom Service.
The Company Greetings will not play when
calls are routed as programmed by this
feature.
Caller ID allows extension users to hear prerecorded
caller names when calls from assigned
Screening
numbers are transferred from the VPS to the
(APT/DPT
extension users.
Integration Only)
DESCRIPTION
A1 SYSTEM FEATURES
REFERENCES
• See "Transfer to Outside
Parameters" in 3.2.4 PBX
Interface Parameters.
• See "Call Transfer to Outside"
in this Table.
• See "Caller ID Callback" in
Table B-6 and Table B-7 in B3
SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See "Caller ID Callback" in
Table B-50 in B7 SYSTEM
ADMINISTRATION—
HARDWARE SETTINGS.
• See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
• See "Caller ID Callback" in the
Glossary.
• See 4.1 GUIDELINES FOR
DIGITAL INTEGRATION.
• See "Caller ID Call Routing" in
B5.3 Intelligent Call Handling.
• See "Caller ID Call Routing" in
the Glossary.
• See "Caller Name
Announcement—Personal"
and "Caller Name
Announcement—System" in
this Table.
Installation Manual 223