Table of Contents
Advertisement
THIS UNIT IS EQUIPPED WITH A GROUNDING CONTACT PLUG. FOR
SAFETY REASONS, THIS PLUG MUST ONLY BE CONNECTED TO A
GROUNDING CONTACT SOCKET WHICH HAS BEEN INSTALLED
ACCORDING TO REGULATIONS.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
Note
Before you start setting or changing system parameters, we recommend that you turn off
the Call Progression Mode with the OFLN command. While off, the power LED of the VPS
will flash and the VPS will not answer any incoming call. After you finish programming,
use the ONLN command to turn on the Call Progression Mode (normal operation). Please
see 7.2.1 Off-line Set (OFLN) and 7.2.2 On-line Set (ONLN) for more details.
Trademarks
•
HyperTerminal is either a registered trademark or a trademark of HILGRAEVE,
INCORPORATED in the United States and/or other countries.
•
IBM is a registered trademark of International Business Machines Corporation in the
United States.
•
Procomm Plus is either a registered trademark or a trademark of DATASTORM
TECHNOLOGIES, INC. in the United States and/or other countries.
•
Smartcom is either a registered trademark or a trademark of Hayes Microcomputer
Products, Inc. in the United States and/or other countries.
•
All other trademarks identified herein are the property of their respective owners.
•
Screen shots reprinted with permission from Microsoft Corporation.
CAUTION
manufacturer's instructions.
Installation Manual
7
Advertisement
Table of Contents
Troubleshooting
