Table of Contents
Advertisement
B7 SYSTEM ADMINISTRATION—HARDWARE SETTINGS
Table B-50
Parameter
EFA Transfer
Caller ID
Callback
Outside Line
Access
Sequence for
Caller ID
Callback
Caller ID
Modify Table
(1-4)
Transfer to Outside Parameters-Caller ID Modify Table
To access the menu for Caller ID Modify Table, follow the menu path as shown:
System Administration Top Menu-1-6-3-4-3-Table No.(1-4)
Table B-51
Parameter
Local Area
Code/
International
Code
336
Installation Manual
Value Range
(Default)
1. Disable
Specifies whether or not the VPS uses EFA (External
2. Enable
Feature Access) when transferring an incoming
(Disable)
outside call to an outside line.
If set to "Enable", the VPS transfers an incoming
outside call to an outside line according to the EFA
Transfer Sequence specified in Table B-49. This
parameter is available with DPT Integration only.
If set to "Disable", the VPS transfers an incoming
outside call to an outside line according to the Call
Transfer to Outside Sequence specified in Table B-
49.
1. Disable
Specifies whether or not the VPS allows a subscriber
2. Enable
to call back the party who left a message in his
(Disable)
mailbox with the Caller ID number sent from the
PBX. This setting applies to the trunk group number
used when the message with the Caller ID number
was left in his mailbox.
Up to 12 digits
Specifies the sequence of outside line access codes
for Caller ID Callback.
consisting of 0-9,
,
This parameter is available when the VPS executes
#, F, R, T, S, W
Caller ID Callback without using EFA.
(9T)
1-4
Specifies the number of the Caller ID Modify Table
(1)
that is used when the VPS converts the Caller ID
Number sent from the PBX to the VPS.
Value Range
(Default)
Up to 6 digits
Specifies the local area/international codes that are
consisting of 0-9
used when the VPS converts the Caller ID Number
(None)
sent from the PBX to the VPS.
Description/Function
Description/Function
Advertisement
Table of Contents
Troubleshooting
