3.1 Assignment of VM (DPT) Group
3 KX-TDE and KX-TDA Series PBX Program-
ming for DPT Programming
3.1 Assignment of VM (DPT) Group
The screen shots shown in this section are for the KX-TDA200. Programming procedures and
availability may vary by country/area, software version, etc. Refer to the documentation included with
the PBX or consult your dealer for more information.
The following PBX programming must be completed, using KX-TDE or KX-TDA Maintenance Console, in order
to establish DPT Integration.
1.
Go to the Groups-VM(DPT) Group-Unit Setting screen from the main screen of the KX-TDE or KX-TDA
Maintenance Console installed on your PC.
2.
Assign a floating extension number to the VPS.
3.
Click Apply to save the changed data.
32
Getting Started
Document Version 2.1 2008/04