Kx-Tda Series Programming For Dpt Programming; Assignment Of Vm (Dpt) Group - Panasonic KX-TVM50 Getting Started

3 KX-TDA Series Programming for DPT
Programming
3.1

Assignment of VM (DPT) Group

The screen shots shown in this section are for the KX-TDA200. Programming procedures and
availability may vary by country/area, software version, etc. Refer to the documentation
included with the PBX or consult your dealer for more information.
The following PBX programming must be completed, using KX-TDA Maintenance Console, in order
to establish DPT Integration.
a)
Go to the "Groups-VM (DPT) Group-Unit Setting" from the main screen of the KX-TDA
Maintenance Console installed on your PC.
b)
Assign a floating extension number to the VPS (VM Unit number).
c)
Click "Apply" to save the changed data.
Getting Started 31