Connecting The Vps With The Panasonic Kx-Ta624; Kx-Ta624 Software Verification And Programming For Digital Integration Via The Manager's Extension - Panasonic KX-TVS90 Installation Manual

Voice processing system
Hide thumbs Also See for KX-TVS90:
Table of Contents

Advertisement

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
4.2 CONNECTING THE VPS WITH THE
PANASONIC KX-TA624
4.2.1 KX-TA624 Software Verification and Programming for
Digital Integration via the Manager's Extension
It is important that the KX-TA624 has the proper software level to allow Digital Integration
with the VPS. Follow the procedures below to confirm the software level, then complete the
required programming before starting up the VPS.
All of the following procedures must be done after entering system programming. Refer
to the KX-TA624 Installation Manual for instructions on how to enter the system
programming mode.
Software Verification
1.
Check the software version of the KX-TA624 using System Program [998].
Example: Y581AYYMMDD(M)
The underlined digits represent the software production date code (year, month, day). For
Digital Integration, the software version of the PBX must be Y581A or higher.
If the software version of the PBX is lower than this, call National Parts Center (1-800-
833-9626) to order a software upgrade.
From the SYS-PGM NO ? screen:
a)
Enter [998].
b)
Press the NEXT button (SP-PHONE). The system displays the ROM version and the
date it was created.
This version must be Y581A or higher for Digital Integration to be utilized.
2.
Set the date and time using System Program [000].
Date and time are automatically synchronized between the VPS and the Panasonic KX-
TA624 during Auto Configuration or Quick Setup.
3.
Set PBX extension numbering using System Program [009].
4.
Assign the Voice Mail Port. This program tells the PBX which jacks will be connected to
the VPS. This allows the PBX to send the proper Digital Integration information to those
ports. Jack 07, or jacks 07 and 08 can be assigned for the VPS1 as the Voice Mail Port. Jack
15, or jacks 15 and 16 can be assigned for the VPS2.
• KX-TVS90 (2 ports): assign max. 2 jacks
74
Installation Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents