Projector Configuration Files (Pcfs) - Christie CP2000-ZX Setup Manual

2.9.3 Projector Configuration Files (PCFs)

Numerous settings collected into a single Projector Configuration File (PCF) further control processing
variables for optimized display of specific source material. Each PCF file, typically created in DCP Librarian,
pre-defines color space, target color gamut, source aspect ratio (resolution), and gamma settings for a cinema
or non-cinema source. Once the collected settings are downloaded to the projector's internal memory, their
PCF can be assigned to the corresponding CP2000-ZX input connection and quickly applied by selecting it
either from the CDP Channel > PCF File option or through the web user interface Admin: Page 2 menu. No
further adjustment in processing should be required. NOTE: Scope and Flat files must be created by the
installer since they are not provided with the projector. Additionally, if the projector is to be set up for 3D
operation, 3DFlat and 3DScope files must also be created.
CP2000-ZX Setup Guide
020-100098-04 Rev. 1 (06-2009)
Section 2: Installation & Setup
2-21