Table of Contents
Advertisement
9-16 Upgrading Your Server
PCI Board
The server is equipped with five slots for installing PCI boards.
IMPORTANT:
Any PCI board is easily affected by static electricity. Handle a PCI board after making
your body contact with a metallic frame section of the server to discharge the static
electricity on your body. Do not make bare hands contact with terminals and
components on the PCI board. In addition, do not put the PCI board on a desk directly.
See "Static Precautions" in this chapter for details of the static electricity.
The long-sized board (full-length board) can be installed only to the PCI slot #5. Care
must be taken to avoid damage to the components on the mother board when installing
the long-sized board.
The qualified service representative can only install or remove the components
described in this subsection. To avoid personal injury or electrical shock, contact
your service representative when your need to install/remove the internal
components.
CAUTION
PCI board slot #1
PCI board slot #2
PCI board slot #3
PCI board slot #4
PCI board slot #5
Mother board
Advertisement
Table of Contents
