Table of Contents
Advertisement
4-12 Configuring Your Server
Advanced
The Advanced menu appears if you move the cursor to the position of "Advanced."
If you select a menu item preceded by symbol
See the table below for the items.
Option
Parameter
Boot-time
Disabled
Diagnostic Screen
[Enabled]
Reset
[No]
Configuration Data
Yes
NumLock
[On]
Off
Memory/Processor
[Boot]
Error
Halt
Multiprocessor
1.1
Specification
[1.4]
and press Enter, the appropriate submenu appears.
Description
Specifies whether the self-test (POST)
running screen is displayed or not on
booting. If disabled, the BIOS will display a
full-screen logo during POST. Press Esc to
switch to the POST execution screen.
Selects "Yes" if you want to clear the system
configuration data during the next boot.
Automatically reset to "No" in the next boot.
Sets power on Numlock state.
If "Halt" is selected, the boot is stopped
when POST error occurs.
Defines Multiprocessor Specification (MPS)
version.
Your Setting
[
]: Factory-set
Advertisement
Table of Contents
