NEC Express5800 110Ej User Manual page 239

Second hard disk drive
Third hard disk drive
Fourth hard disk drive
*1 An optional SCSI controller or RAID controller is required for installing SCSI hard disk drive.
*2 Set the SCSI termination to "OFF" for all hard disk drives.
Serial ATA hard disk drive
Hard Disk Drive
First hard disk drive
Second hard disk drive
Third hard disk drive
Fourth hard disk drive
2.
See the section "Preparing for Installation and Removal" described earlier to prepare.
3.
Remove the left side cover and front mask.
4.
Disconnect the interface cable and power cord from the hard disk drive if connected.
*2
ID1 Lower middle
*2
ID2 Upper middle
*2
ID3 Top
Bay to Install
Bottom
Lower middle
Upper middle
Top
Serial ATA connector
on mother board
Serial ATA connector 1
Serial ATA connector 2
Serial ATA connector 3
Serial ATA connector 4
Upgrading Your Server 9-11
Serial ATA connector 4
Serial ATA connector 3
Serial ATA connector 2
Serial ATA connector 1