Table of Contents
Advertisement
Console Redirection
The following screen appears if you select "Console Redirection" on the Server menu and press Enter.
See the table below for the items.
Option
Parameter
BIOS Redirection
[Disabled]
Port
Serial Port A
Serial Port B
ACPI Redirection
[Disabled]
Port
Serial Port A
Serial Port B
Baud Rate
9600
[19.2k]
38.4k
57.6k
115.2k
Terminal Type
[PC ANSI]
VT100+
VT-UTF8
Flow Control
None
XON/XOFF
[CTS/RTS]
CTS/RTS+CD
Remote Console
[Disabled]
Reset*
Enabled
* Displayed only when Remote Management Card (option) is installed.
Description
Specify the serial port to which a
remote console is connected.
Specify the serial port to which an
ACPI console is connected.
Specify the baud rate used for the
interface with successive remote
consoles.
Specify the type of remote console.
Specify the flow control method.
Specify whether to enable or disable
the reset command issued from
remote console.
Configuring Your Server 4-23
Your Setting
[
]: Factory-set
Advertisement
Table of Contents
