NEC Express5800 110Ej User Manual page 254

9-26 Upgrading Your Server
Installation Order and Notes
Single channel memory configuration
Install DIMMs one by one in the ascending order of DIMM slot numbers.
Dual channel memory configuration
To activate the dual channel mode, the following conditions must be met:
– Matched DIMM configuration in each channel
– Same density*
– Same DRAM technology*
– Same DRAM bus width*
– All either single-sided or dual-sided
– Matched in both channels.
– Populate symmetrical memory slots (#1 and #3, #2 and #4).
The following table lists an example of the relationship between the installation condition and the dual
channel memory mode.
Installation
example
1
2
3
4
Dual channel
memory mode
#1
Active 512MB
(factory-installed)
Active 512MB
(factory-installed)
Inactive 512MB
(factory-installed)
Inactive 512MB
(factory-installed)
DIMM group
#2 #3
None 512MB
1GB 512MB
1GB 512MB
1GB None
#4
None
1GB
None
1GB