Table of Contents
Advertisement
When you have selected a server site, hold the server by its bottom with at least three persons and carry it to the site,
then place it slowly and gently.
IMPORTANT:
disengage and damage the server.
Do not install the server in the following locations as it may cause malfunctions of the server.
Places with drastic changes in temperature (e.g., near a heater, air conditioner, or refrigerator).
Places with strong vibrations.
Places with corrosive gas in presence, near chemicals, or with possibilities of chemicals sprayed over.
On a non-antistatic carpet.
Places where objects may fall on the server.
Places where the only power outlet is already connected to a device with a large power consumption.
Places near a device generating intense magnetic field (such as a TV, radio, broadcast/communication antenna,
power transmission wire, and electromagnetic crane).
Places near equipment that generates power noise (e.g., contact spark at power-on/power off of commercial
power supply through a relay). If you must install the server close to such equipment, request to your service
representative a separate power cabling or noise filter installation.
Do not hold the server by its front mask to lift it. The front mask may
Setting Up Your Server 3-5
Advertisement
Table of Contents
