Download Print this page

NEC Express5800 A2040b Initial Operation Verification Manual

Sap hana appliance
Hide thumbs

Advertisement

Quick Links

Initial Operation Verification Guide
25-Apr-2014
27-Nov-2014

Table of Contents

1.
Preparation...................................................................................................................... 2
1.1.
Check the Power Plugs ........................................................................................... 2
1.2.
Check the NICs ....................................................................................................... 2
1.2.1.
Production Network ............................................................................................. 2
1.2.2.
Management Network ......................................................................................... 2
1.3.
External Storage (JBOD) ........................................................................................ 3
2.
Start the Server ............................................................................................................... 3
2.1.
Power on the server ................................................................................................ 3
2.2.
Logon to the server ................................................................................................. 4
2.3.
Start the SAP HANA Instance ................................................................................. 5
3.
Stop the Server ............................................................................................................... 6
3.1.
Stop the SAP HANA Instance ................................................................................. 6
3.2.
Power off the server ................................................................................................ 6
SAP HANA Appliance
Express5800 A2040b
(Revision: Nov-2014)
NEC Europe, Ltd
SAP Global Competence Center
Revision Record
Initial Release
Added information for external storage

Advertisement

loading

  Also See for NEC Express5800 A2040b

  Summary of Contents for NEC Express5800 A2040b

  • Page 1: Table Of Contents

    SAP HANA Appliance Express5800 A2040b Initial Operation Verification Guide (Revision: Nov-2014) NEC Europe, Ltd SAP Global Competence Center Revision Record 25-Apr-2014 Initial Release 27-Nov-2014 Added information for external storage Table of Contents Preparation........................2 1.1. Check the Power Plugs ................... 2 1.2.
  • Page 2: Preparation

    1. Preparation 1.1. Check the Power Plugs Please check that all power plugs are connected to the back of server. 1.2. Check the NICs 1.2.1. Production Network Please check that all Network Interface Cards are connected as required. This means the two dual port adapters mounted in slots number 8 and 9 should be connected.
  • Page 3: External Storage (Jbod)

    1.3. External Storage (JBOD) In case you have a 2TB appliance with an external storage please connect the storage to the 2 RAID controller. The RAID controller is mounted in PCI slot 5. Please connect its port “A” to port “0” of the JBOD.
  • Page 4: Logon To The Server

    If you have an external storage please also power on the storage unit by pressing both dip switches at the back side of the storage near the power units. Wait for the server to finish the boot operation. Once it has completed you will be presented the following login screen.
  • Page 5: Start The Sap Hana Instance

    2.3. Start the SAP HANA Instance Change the current directory .. # cd /usr/sap/hostctrl/exe Start the SAP HANA Instance. Check the status “OK”.  Instance No : “HANA>SAP HANA> Instance No.” on parameter sheet. # ./sapcontrol –nr <instance no> -function Start 16.12.2013 XX:XX:XX Start Check the SAP HANA Instance Status.
  • Page 6: Stop The Server

    3. Stop the Server 3.1. Stop the SAP HANA Instance Change the current directory .. # cd /usr/sap/hostctrl/exe Stop the SAP HANA Instance. Check the status “OK”.  Instance No : “HANA>SAP HANA> Instance No.” on parameter sheet. # ./sapcontrol –nr <instance no> -function Stop 16.12.2013 XX:XX:XX Stop Check the SAP HANA Instance Status.