Table of Contents
Advertisement
STATIC PRECAUTIONS
An electrostatic discharge (ESD) can damage disk drives, option boards, and other components. Electronic device can
be easily damaged by static electricity. To prevent damage, observe the following information.
Wear a wrist strap (an arm belt or anti-static glove).
Wear a wrist strap on your wrist. If no wrist strap is available, touch an unpainted metal part of the cabinet
before touching a component to discharge static electricity from your body.
Touch a metal part regularly when working with components to discharge static electricity.
Select a suitable work space.
– Work with the server on the anti-static or concrete floor.
– When you work with the server on a carpet where static electricity is likely to be generated, make sure take
anti-static measures beforehand.
Use a work table.
Place the server on an anti-static mat to work with it.
Clothe
– Do not wear a wool or synthetic cloth to work with the server.
– Wear anti-static shoes to work with the server.
– Take off any jewels (a ring, bracelet, or wrist watch) before working with the server.
Handling of components
– Keep any component in an anti-static bag until you actually install it to the server.
– Hold a component by its edge to avoid touching any terminals or components.
– To store or carry any component, place it in an anti-static bag.
Upgrading Your Server 9-3
Advertisement
Table of Contents
