Table of Contents
Advertisement
4-20 Configuring Your Server
Server
The Server menu appears if you move the cursor to "Server."
Selecting an item on the screen allows the proper submenu to appear.
See the table below for the items.
Option
Parameter
Assert NMI on
Disabled
SERR
[Enabled]
Post Error Pause
Disabled
[Enabled]
AC-LINK
Stay Off
[Last State]
Power On
Power on Delay
[0] - 255
Time
BMC IRQ*
Disabled
[11]
FRB-2 Policy*
Disable FRB2
Timer
[Retry 3 Times]
Boot Monitor*
[Disabled]
Every 5 minutes
between 5
minutes and 60
minutes
Description
Indicates whether PCI SERR is
supported or not.
Indicates whether POST is aborted
once at the end of POST if an error
occurs during the execution of POST.
Specify the state of power when the AC
power to the server is turned off once
and then on. (See the table below.)
Specify the DC power on delay time
within the range between 0 and 255
seconds. The time specified is valid
when "Power On" or "Last State" is
specified for AC LINK.
Set the IRQ for BMC.
Set the FRB level 2 timer.
Specify whether to enable or disable the
boot monitoring function on booting, or
select the time limit for timeout.
To use this function, install ESMPRO
Agent. Set this item to "Disabled" if the
system is booted from OS without
installation of ESMPRO Agent.
Your Setting
Advertisement
Table of Contents
