Table of Contents
Advertisement
AC LINK Feature
When the power cord of the server is connected to an uninterruptible power supply (UPS) unit, the server supports the
power linkage feature that enables control over the power supply from the UPS to the server. The AC LINK feature can
be enabled or disabled with Power Management Setup in the Server menu of the BIOS setup utility, "SETUP." (See
Chapter 4.)
Security
The BIOS setup utility provides a number of security features to prevent unauthorized or accidental access to the system.
Once the security measures are enabled, access to the system is allowed only after the user enters the correct
password(s). For example:
Set and enable an administrative password.
Set and enable a user password
Check the user account when entering the BIOS setup utility or booting the system.
EXPRESSBUILDER
The CD-ROM that comes with your server contains a setup utility called "EXPRESSBUILDER." When you have first
installed the server or appended features to the server, use the EXPRESSBUILDER to set up your server.
Refer to Chapter 6 for details.
IMPORTANT:
server, nor other servers than the one that EXPRESBUILDER is provided for. Not
following this instruction may cause failures.
The major functions of the EXPRESSBUILDER are:
To install the OS.
It installs an operating system.
To diagnose the system.
It diagnoses the server.
To create a support disk.
It copies utilities in the EXPRESSBUILDER CD-ROM into a floppy disk to launch them from the floppy
disk.
To update the BIOS
It updates the BIOS features of the server.
Do not use the EXPRESSBUILDER for any other computers than the
General Description 2-11
Advertisement
Table of Contents
