Table of Contents
Advertisement
8-20 Troubleshooting
[Complete] does not appear on [Role of Computer] screen.
→ The [Complete] does not appear if the Setup File that has already been created is loaded.
→ [Complete] appears only when you first entered the [Role of Computer] screen.
Once you go to the next screen from [Role of Computer], the [Complete] will not appear even if you enter
[Back] to go back to the [Role of Computer] screen.
Select [Use Existing Array] at [New/Existing RAID Configuration], but the OS is installed in the whole area of the
disk.
→ Is there any other partition than the partition to re-use (excluding maintenance area)? If the partition other
than the one to re-use does not exist, the setup will reserve the whole area of the disk to install operating
system.
Specified to join the Domain, but the system is installed as Workgroup.
→ When the setup fails to join the Domain during the installation, it will install the system as Workgroup.
Open [System] in Control Panel to specify joining the Domain.
Specified large value as partition size, but when Windows 2000 is actually started, the system partition is created
by 4095MB.
→ Is the [Partition Size] specified by the value larger than the real area? If you want to create one partition
in all area of the hard disk drive (excluding the maintenance area) to install the OS, specify [All Area].
Windows 2000 started with different display resolution from the specified value.
→ If the specified display resolution can not be used, the system will use the nearest value or the default
value of the driver.
Entered the incorrect Product ID/CD key.
→ Even if you entered the incorrect Product ID/CD key, Express Setup will start. However, the setup will
stop and asks you to re-enter the correct value. Also in this case, input request will occur when rebooting
after GUI setup completed during Express Setup. If these 2 inputs are done correctly, there is no problem
on Windows 2000 setup.
Unable to specify the details of Network adapter.
→ In Express Setup, you can not specify the details of Network adapter. Specify them from Control Panel
after starting Windows 2000.
Advertisement
Table of Contents
