Audio Settings Page; Wav Files - Supported Sample Rates - AMX MVP-5200i-GB Instruction Manual

Audio Settings Page

The Audio Settings page allows adjustment of volume levels and panel sounds settings (FIG. 53).
Audio Settings pages
FIG. 53
Features on these pages include:
Audio Settings Page
Back:
WiFi/Wired/USB Icon:
Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current
Default Panel Sounds:
Internal Sound Level:
Audio Output:
Intercom Mic Level:
Intercom Volume:
WAV f iles - Supported Sample Rates
The following sample rates for WAV files are supported by MVP-5200i panels:
Supported WAV Sample Rates
• 48000 Hz
• 44100 Hz
• 32000 Hz
• 24000 Hz
• 22050 Hz
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current connection to the Master is
Wireless (image of a radio antenna), Wired (image of three networked computers), or USB.
connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master.
• Activating the Button Hit button plays a default sound when you touch an active button.
• The Play Test Sound button plays a test WAV/MP3 file over the panel's internal speakers.
• Activating the Button Miss button plays a default sound when you touch a non-active button or any area
outside of the active button
• The singleBeep01 and singleBeep02 buttons play preselected examples of single beeps over the panel's
internal speakers
Adjusts the volume level on the panel's internal speaker:
• Use the Up/Down buttons to adjust the volume (range = 0 - 100)
• The Internal Sound Level bargraph indicates the current sound level. Press the bargraph to the left or right of
the graph marker to adjust the volume level in one-percent increments (range = 0 - 100), or press the
bargraph and hold to move the graph marker to the desired level.
• The Mute button mutes the internal speaker volume
Enables USB headphone output.
Adjusts the volume level on the intercom's microphone:
• Use the Up/Down buttons to adjust the microphone level (range = 0 - 100). Press the bargraph to the left or
right of the graph marker to adjust the volume level in one-percent increments (range 0 - 100), or press the
bargraph and hold to move the graph marker to the desired level.
Sets the volume level for intercom calls from another MVP-5200i:
• Use the Up/Down buttons to adjust the Line-In volume level (range = 0 - 100).
• The Line-In Level bargraph indicates the current Line-In level. Press the bargraph to the left or right of the
graph marker to adjust the volume level in one-percent increments (range 0 - 100), or press the bargraph
and hold to move the graph marker to the desired level.
• The Mute button mutes the Line-In volume.
• 16000 Hz
• 12000 Hz
• 11025 Hz
• 8000 Hz
Setup Pages
49