Malfunction Code And Defective Condition - Suzuki GSR600 Service Manual

4-28 FI SYSTEM DIAGNOSIS

MALFUNCTION CODE AND DEFECTIVE CONDITION

DETECTED
DTC No.
C00 NO FAULT
CMP sensor
C11
P0340
CKP sensor
C12
P0335
IAP sensor
C13
H
P0105
L
TP sensor
C14
H
P0120
L
ECT sensor
C15
H
P0115
L
DETECTED FAILURE CONDITION
ITEM
The signal does not reach ECM for 3
sec. or more, after receiving the starter
signal.
The signal does not reach ECM for 3
sec. or more, after receiving the starter
signal.
The sensor should produce following
voltage.
0.5 V sensor voltage < 4.85 V
In other than the above range, C13
(P0105) is indicated.
Sensor voltage is higher than specified
value.
Sensor voltage is lower than specified
value.
The sensor should produce following
voltage.
0.2 V sensor voltage < 4.80 V
In other than the above range, C14
(P0120) is indicated.
Sensor voltage is higher than specified
value.
Sensor voltage is lower than specified
value.
The sensor voltage should be the fol-
lowing.
0.15 V sensor voltage < 4.85 V
In other than the above range, C15
(P0115) is indicated.
Sensor voltage is higher than specified
value.
Sensor voltage is lower than specified
value.
–––––––––––
CHECK FOR
–––––––––––
CMP sensor wiring and mechan-
ical parts
CMP sensor, intake cam pin,
wiring/coupler connection
CKP sensor wiring and mechan-
ical parts
CKP sensor, lead wire/coupler
connection
IAP sensor, lead wire/coupler
connection
IAP sensor circuit shorted to
VCC or ground circuit open
IAP sensor circuit open or
shorted to ground or VCC circuit
open
TP sensor, lead wire/coupler
connection
TP sensor circuit shorted to
VCC or ground circuit open
TP sensor circuit open or
shorted to ground or VCC circuit
open
ECT sensor, lead wire/coupler
connection
ECT sensor circuit open or
ground circuit open
ECT sensor circuit shorted to
ground