ENGINE
3-73
• Install the regulator/rectifier bracket 3 and tighten the other
crankcase bolts a little at a time to equalize the pressure.
Crankcase bolt: (M6) Initial: 6 N·m (0.6 kgf-m)
Final : 11 N·m (1.1 kgf-m)
NOTE:
Fit the clamp to the crankcase bolt A .
NOTE:
Fit a new gasket to the crankcase bolt B .
NOTE:
After the crankshaft journal bolts and crankcase bolts have been
tightened, check if the crankshaft rotates smoothly.