Suzuki GSR600 Service Manual page 64

3-12 ENGINE
• Install the engine sprocket and its washer.
• Apply a small quantity of THREAD LOCK to the driveshaft
thread portion.
 99000-32050: THREAD LOCK "1342"
• Tighten the engine sprocket nut 1 to the specified torque.
 Engine sprocket nut: 115 N·m (11.5 kgf-m)
• Install the speed sensor rotor 2.
• Tighten the speed sensor rotor bolt 3 to the specified torque.
 Speed sensor rotor bolt: 23 N·m (2.3 kgf-m)
• Apply SUZUKI SUPER GREASE "A" to the clutch push rod
end.
 99000-25010: SUZUKI SUPER GREASE "A"
• Install the engine sprocket cover.
NOTE:
When installing the engine sprocket cover, align the clutch
release cylinder hole with the end of clutch push rod.
• Install the gearshift lever as shown.
(or equivalent grease)
A Footrest
B 35 – 45 mm