Tps Adjustment - Suzuki GSR600 Service Manual

TPS ADJUSTMENT

1. Adjust the engine rpm to 1 300 r/min. (2-15)
2. Connect the special tool (Mode select switch) to the dealer
mode coupler at the wiring harness.
3. If the throttle position sensor adjustment is necessary, remove
the air cleaner box (5-13) and follow the procedure
below.
4. Loosen the screw and turn the throttle position sensor 1 and
bring the line to the middle.
5. Then, tighten the screw to fix the throttle position sensor.
 09930-11950: Torx wrench
09930-82720: Mode select switch
The LCD displays the line for 0.4 sec. at a time, and when such
a display repeats two times, it indicates the current position
where the sensor is fixed.
A Incorrect
B Correct position
FI SYSTEM DIAGNOSIS 4-19