• Replace the exhaust pipe gaskets and muffler connectors
with new ones.
NOTE:
Be sure to face the tabs A on the exhaust pipe gaskets 1 to the
engine side when installing them.
• Tighten the exhaust pipe bolts, muffler mounting bolts and
muffler connecting bolts to the specified torque.
Exhaust pipe bolt: 23 N·m (2.3 kgf-m)
Muffler mounting bolt: 23 N·m (2.3 kgf-m)
Muffler connecting bolt: 23 N·m (2.3 kgf-m)
• Install the HO2 sensor 2.
HO2 sensor: 48 N·m (4.8 kgf-m)
• Perform service and adjustment in the following items.
* Engine oil (2-13)
* Engine coolant (2-17)
* Throttle cable play (2-15)
* Clutch (2-16)
* Idling adjustment (2-15)
* Throttle valve synchronization (5-24)
* Drive chain slack (2-20)
* Wiring harness, cables and hoses (10-17 to -23)
ENGINE
3-13