Suzuki GSR600 Service Manual page 128

3-76 ENGINE
• Tighten the crankcase bolts a little at a time to equalize the
pressure.
 Crankcase bolt: (M6) Initial: 6 N·m (0.6 kgf-m)
(M8) Initial : 15 N·m (1.5 kgf-m)
NOTE:
* Fit new copper washer to the crankcase bolts A .
* Fit new gasket washer to the crankcase bolts B .
• Check that the driveshaft and countershaft rotate smoothly.
Final : 11 N·m (1.1 kgf-m)
Final : 26 N·m (2.6 kgf-m)