Suzuki GSR600 Service Manual page 134

3-82 ENGINE
GENERATOR COVER
• Apply SUZUKI BOND lightly to the mating surfaces at the
parting line between the upper and middle crankcases as
shown.
 99000-31140: SUZUKI BOND "1207B"
• Install the dowel pins 1 and new gasket 2.

Use new gasket to prevent oil leakage.
• Install the generator cover and tighten the generator cover
bolts to the specified torque.
 Generator cover bolt: 10 N·m (1.0 kgf-m)

Be careful not to pinch the finger between the genera-
tor cover and the crankcase.
NOTE:
Fit the gasket washer to the bolts A .
• Install the CKP sensor 3.
• Apply SUZUKI BOND lightly to the groove of CKP sensor lead
wire gromet.
 99000-31140: SUZUKI BOND "1207B"