Suzuki GSR600 Service Manual page 139

OIL PUMP
• Install the O-ring to the oil pump and apply SUZUKI SUPER
GREASE "A" to it.

Use new O-ring to prevent oil leakage.
NOTE:
Set the oil pump shaft end A to the water pump shaft.
 99000-25010: SUZUKI SUPER GREASE "A"
• Install the oil pump with the oil pump mounting bolts and then
tighten them to the specified torque.
 Oil pump mounting bolt: 10 N·m (1.0 kgf-m)
• Install the washer 1 and pin 2.
NOTE:
Be careful not to drop the washer 1 and pin 2 into the crank-
case.
• Install the oil pump driven gear 3.
• Install the snap ring 4.
CLUTCH
• Install the thrust washer onto the countershaft.
NOTE:
The chamfer side A of thrust washer faces inner side.
(or equivalent grease)
ENGINE 3-87