2-10
PERIODIC MAINTENANCE
NOTE:
* Be sure to apply engine oil to tappet shim top and bottom
faces.
* When seating the tappet shim, be sure the figure printed sur-
face faces the tappet.
NOTE:
Reinstall the camshafts in the specified manner. ( 3-97)
• After replacing the tappet shim and camshafts, rotate the
engine so that the tappet is depressed fully. This will squeeze
out oil trapped between the shim and the tappet that could
cause an incorrect measurement. Then check the clearance
again to confirm that it is within the specified range.
• After finishing the valve clearance adjustment, reinstall the fol-
lowing items.
* Cylinder head cover (3-101)
* Spark plugs and plug caps (2-6)
* Throttle body assembly (5-19)
Valve timing inspection plug: 11 N·m (1.1 kgf-m)