Suzuki GSR600 Service Manual page 138

3-86 ENGINE
NOTE:
Hook the return spring end A to the stopper 5 .
• Check the gearshift cam stopper moves smoothly.
• Locate the gearshift cam in the neutral position.
• Install the gearshift cam stopper plate 6.
NOTE:
Align the gearshift cam pin B with the gearshift cam stopper
plate hole C .
• Apply a small quantity of THREAD LOCK to the gearshift cam
stopper plate bolt and tighten it to the specified torque.
 99000-32050: THREAD LOCK "1342"
 Gearshift cam stopper plate bolt: 13 N·m (1.3 kgf-m)
• Install the gearshift shaft assembly 7 and washer 8 as
shown.
NOTE:
Pinch the gearshift arm stopper 9 with return spring ends D .
• Install the washer 0 and snap ring A.