Suzuki GSR600 Service Manual page 133

• Apply SUZUKI BOND to the mating surfaces.
 99000-31140: SUZUKI BOND "1207B"
NOTE:
Use of SUZUKI BOND is as follows:
* Make surfaces free from moisture, oil, dust and other foreign
materials.
* Spread on surfaces thinly to form an even layer, and assemble
the covers within few minutes.
* Take extreme care not to apply any BOND to the oil hole, oil
groove and bearing.
* Apply to distorted surfaces as it forms a comparatively thick
film.
1 Starter clutch cover
2 Clutch cover
3 Magnet cover
4 Lower crankcase
5 Upper crankcase
6 Gasket bolt
ENGINE 3-81