Tps Adjustment - Suzuki AN650 2002 Service Manual

6-20 FI SYSTEM/ CVT SYSTEM
CODE MALFUNCTION PART
None
C00
C11 Camshaft position sensor (CMPS)
C12 Crankshaft position sensor (CKPS)
C13 Intake air pressure sensor (IAPS)
C14 Throttle position sensor (TPS)
C15 Engine coolant temp. sensor (ECTS)
C16 Speed sensor
C21 Intake air temperature sensor (IATS)
C22 Atmospheric pressure sensor (APS)
C23 Tip over sensor (TOS)
C24 Ignition signal #1 (IG coil #1)
C25 Ignition signal #2 (IG coil #2)
C32 Fuel injector signal #1
C33 Fuel injector signal #2
C40 Idle air control valve (IAC valve)
C41 Fuel pump control system (FP control system)
C42 Ignition switch signal (IG switch signal)
C44 Heated oxygen sensor (HO2S)
C50 CVT serial communication
C51 CVT motor
C52 CVT pulley position sensor
C53 CVT speed sensor
C54 CVT secondary pulley revolution sensor
C55 CVT engine revolution signal
C56 CVT throttle position signal
C58 CVT reduction ratio disagreement
In the LCD (DISPLAY) panel, the malfunction code is indicated from small code to large code.

TPS ADJUSTMENT

1. Warm up the engine and adjust the engine idle speed to 1 200
± 100 rpm. ( 2-18)
2. Stop the engine.
3. Connect the special tool (Mode select switch) and select the
dealer mode.
4. If the throttle position sensor adjustment is necessary, loosen
the screw and turn the throttle position sensor and bring the
line to middle.
5. Then, tighten the screw to fix the throttle position sensor.
Incorrect
Correct position
Incorrect
REMARKS
No defective part
Pick-up coil signal, signal generator
Speed sensor signal for FI system
For #1 cylinder
For #2 cylinder
For #1 cylinder
For #2 cylinder
Fuel pump, Fuel pump relay
Anti-theft
E-02, 19
Speed sensor signal for CVT system