Configuring The Dcbx (Data Center Bridging Exchange) Mode - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual
San boot environment configuration manual
Hide thumbs
Also See for PRIMEQUEST 1000 Series:
- User manual (905 pages) ,
- Tool reference (578 pages) ,
- Installation manual (344 pages)
Table of Contents
Advertisement
3.2.7 Configuring the DCBX (Data Center Bridging Exchange) mode
Set the mode for the FCoE protocol.
1. Select [Configure DCBX Mode] from the [Emulex Adapter Configuration Main Menu] screen.
The screen for selecting <CIN> or <CEE> appears.
To connect to an FCoE SW supporting CEE mode, select <CEE>, and then press the [Enter] key.
To connect to an FCoE SW supporting CIN mode, select <CIN>, and then press the [Enter] key.
FIGURE 3.13
[Configure DCBX Mode] (1)
92
Advertisement
Table of Contents
