Partition Settings And Configuration Display; Remcs (Automatic Notification Function); Figure 4.3 Example Of Mounting Different Os And Versions On Each Partition - Fujitsu PRIMEQUEST 2000 Series General Description Manual

CHAPTER 4 Functions provided by the PRIMEQUEST 2000 series

4.3 REMCS (automatic notification function)

For the details of the REMCS Agent, see "PRIMEQUEST 2000 series REMCS Service Manual" (C122-
E180).

4.2.5 Partition settings and configuration display

It is a function that displays the settings and configuration of partition. Settings and configuration display of
partition is used for determining the unit of management and controlling and distributing the hardware
resources that are installed. Below is an example where in three partitions are set.

FIGURE 4.3 Example of mounting different OS and versions on each partition

The partitions are set up with specified combinations of the SB and IOU. A displayed partition configuration
can show each incorporated SB and IOU and their components in detail. The partition can be changed by
modifying the combination of the SB and IOU in the same way as they were specified.
4.3 REMCS (automatic notification function)
The REMCS Agent automatically detects the hardware fault prediction information and reports the
information to the OSC via e-mail.
In the OSC, professional experts working on behalf of the system administrator provide appropriate support
based on the reported information, to prevent problems from occurring. They attempt to solve problems
within a short time.
If any problems should occur, professional experts working on behalf of the system administrator would
identify the source of the problem based on the reported information, prepare replacement parts and send
service engineers.
67 C122-B025-02EN