Re- Assembling The Pumping Element Unit And The Bottom Valve - Husqvarna TC449 Workshop Manual

1 1
1 2
FRONT SUSPENSION
• Mount the stop ring ( 11 ) using a small flat- tip screwdriver, checking it fits
perfectly into its groove and being very careful not to scratch the stanchion
tube.
• Re- assemble the dust seal ( 12 ) in its seat, pressing it home with your
hands.

Re- assembling the pumping element unit and the bottom valve

3 0
• Insert the pumping element rod ( 32 ) into the body ( 30 ).
3 2
In both pumping elements there is a sealing segment; before the as-
sembling make sure that it is not worn or damaged. Replace if necessary.
Take great care and if necessary use a small flat- tip screwdriver to help
the pumping element piston into the sleeve. Insert the piston without any
interference.
I.42
1 edition (08-2010) _Rev. 11-2010
st