Husqvarna TC449 Workshop Manual page 278

TC - TE - TXC
3
B
- Remove the reservoir cap (2) or (2A) 21 mm wrench and the rubber gaiter.
- Loosen the bleed valve (1) and (1a) on the calliper.
- Pump the brake lever (3) or the brake pedal (3A) until draining all fluid.
- Tighten the bleed valve and fill the reservoir with fresh fluid.
A
- Loosen the bleed valve, operate lever or pedal, tighten the valve keeping
lever or pedal pressed and then release quickly.
- Repeat the process until the circuit is full and you can see clear fluid coming
MIN
out of the plastic hose: now tighten the bleed valve.
- Top up with fluid up to level (A) or (B) and refit rubber gaiter and reservoir
cover.
After changing the fluid, you will need to bleed air from the circuit.
H06404
2
H06406
2A
H006226
3A
H006228
BRAKES
2
MAX
MIN
3
L.12
SMR
H06405
1 edition (08-2010) _Rev. 11-2010
st