Oil Intake Pump Replacement (Crankcase Cover Removed); Removing Oil Intake Pump; Fitting Oil Intake Pump - Husqvarna TC449 Workshop Manual

Oil intake pump replacement (crankcase cover removed)

H01940
H01775
H01775
ENGINE DISASSEMBLY/REASSEMBLY
Preliminary operations
Clutch housing axial bearing disassembly
Clutch thrust washer disassembly
Oil pump idler gear disassembly
Oil pump control gear disassembly
Oil intake pump disassembly
• Disassemble the following parts:
- Screws (1)
- Cover (2)
- Inner rotor (3)
- Outer rotor (4)
- Needle roller (5)
Fit oil intake pump
• Lubricate needle roller (5), outer rotor (4), and inner rotor (3).
Consumables
Molykote D Paste
• Assemble the following parts:
- Needle roller (5)
- Outer rotor (4), and inner rotor (3) with reference mark pointing out
- Cover (2)
• Fit screws (1).
Tightening torque figures
Pump cover on crankcase
M5 x 12, Microincapsulated
screw replacement
F1.64
Clear solid lubricant for metal
part assembling and settling
6 Nm
1 edition (08-2010) _Rev. 11-2010
st