Engine Oil Filter Assembly - Husqvarna TC449 Workshop Manual

Engine oil filter assembly

H01855
H01856
1 edition (08-2010) _Rev. 11-2010
st
ENGINE DISASSEMBLY/REASSEMBLY
• Assemble rear oil mesh filter.
• Assemble the following parts:
- O-Rings (5, 4, 2)
- Filter (3)
• Fit screw (1).
Tightening torque figures
Oil mesh filter screw plug on crankcase
M20 x 1.5, with O-Ring Grease
thread
• Assemble front oil mesh filter.
• Assemble the following parts:
- O-Rings (5, 4, 2)
- Filter (3)
• Fit screw (1).
Tightening torque figures
Oil mesh filter screw plug on crankcase
M20 x 1.5, with O-Ring Grease
thread
F1.9
10 Nm / 1 Kgm / 7,38 ft/lb
10 Nm / 1 Kgm / 7,38 ft/lb