Disassembling/Assembling Starter Motor; Disassembling Starter Motor; Assembling Starter Motor - Husqvarna TC449 Workshop Manual

Disassembling/assembling starter motor

H01957
H01958
H01959
1 edition (08-2010) _Rev. 11-2010
st
ENGINE DISASSEMBLY/REASSEMBLY
Removing starter motor
• Disconnect positive cable (1).
• Remove screws (2).
• Remove starter motor (3).
Starter motor assembly
• Check sealing ring (1) for damages. Replace it, if necessary.
• Lubricate contact surface (arrow).
Consumables
Molykote D Paste
• Fit starter motor, taking special care to sealing ring (3).
• Fit screws (2) with the ground cable pointing up.
Tightening torque figures
Starter motor onto crankcase
M6 x 25
Grease thread
• Fit positive cable (1).
Tightening torque figures
Wiring harness on starter motor
M6
F1.69
Clear solid lubricant for metal
part assembling and settling
11 Nm
8 Nm