Assembling The Hydrostop Unit; Piston Rod, Assembling - Husqvarna FC 350 2016 Repair Manual

Assembling the hydrostoR unit
Info
The procedures are the same on both fork legs.
e
/
Riston rod assembling
Info
The steps are identical for both fork legs, except for the hydrostop needle and valve.
201790-10
R00033-10
-
Mount and grease O-ring
I
Lubricant (T158) (llill p. 282)
-
Mount washer @.
-
Mount shim stack @) with the smaller washers facing down-
ward.
Info
Note the setting list.
-
Mount a new O-ring on hub
0-
-
Mount and tighten nut
Guideline
I I
Hydro stop unit nut
-
Degrease the piston rod.
-
Clamp the piston rod with the special tool.
I
Clamping stand (T14049S)
-
Grease O-ring. Mount valve needle
I
Lubricant (T158) (ll!:!I p. 282)
-
Mount spring@.
-
Mount and tighten adapter@) with spring
Guideline
Adapter of piston
rod
6 FORK, TRIPLE CLAMP
O.
C,
and position the hub.
M6x0.5 I 6 Nm (4.4 lbf ft)
(a p. 299)
O
in the piston rod.
C,.
M6x0.5 12 Nm (8.9 lbf ft)
41
27