Coolant Pump Inside Crankcase Oil Seal Replacement; (Crankcase Cover Removed); Coolant Pump Control Rear Oil Seal Disassembly; Coolant Pump Control Shaft Check - Husqvarna TC449 Workshop Manual

Coolant pump inside crankcase oil seal replacement (crankcase cover removed)
H01942
H01943
H01943
1 edition (08-2010) _Rev. 11-2010
st
ENGINE DISASSEMBLY/REASSEMBLY

Coolant pump control rear oil seal disassembly

• Remove oil seal (1).

Coolant pump control shaft check

Check
Result: Damaged or worn shaft
Action:
Replace coolant pump drive (crankcase cover removed)

Coolant pump control rear oil seal assembly

• Clean oil seal seat.
• Fit oil seal (1) using a suitable tool.
F1.39