Engine Guard Removal; Gear Shift Pedal Removal - Husqvarna TC449 Workshop Manual

1
1
H02481
1
H02480
1 edition (08-2010) _Rev. 11-2010
st
GENERAL PROCEDURES

Engine guard removal

2
-
1
H02479

Gear shift pedal removal

-
2
-
-
2
Using a 8 mm socket wrench, loosen the three screws (1), and remove engine
guard (2).
Remove chain and engine guard as indicated in the relevant paragraph.
Engage the 2nd gear with the gear shift pedal (1)
Using a 8 mm socket wrench, loosen screw (2), and remove gear shift pedal
(1).
on reassembly, tighten screw (2) to 10 Nm - 1.02 Kgm - 7.38 ft/lb.
E.31