1
2
2
3
1
edition (08-2010) _Rev. 11-2010
st
GENERAL PROCEDURES
Rear tank removal
-
-
3
H02457
Solenoid starter removal
-
1
-
-
-
H02458
Remove the rear chassis, as described in the relevant paragraph.
Loosen the two screws (1) securing tank (2) to rear chassis (3), and remove
tank.
on reassembly, check the correct positioning of the bushings.
Remove the saddle as described in the relevant paragraph.
Disconnect the negative and positive cables of the battery.
Disconnect the starter motor positive cable (1) from the solenoid starter
(2),
Disconnect the connector (3) and remove the solenoid starter (2) from its
mount.
E.23