Slider Assembly; Chain Tensioner Assembly - Husqvarna TC449 Workshop Manual

H01839
H01840
1 edition (08-2010) _Rev. 11-2010
st
ENGINE DISASSEMBLY/REASSEMBLY

Slider assembly

• Assemble the following parts:
- Slider (4)
- Washer (2)
• Fit screw (1).
Tightening torque figures
Slider onto cylinder head
Calibrated screw, M8
• Fit screw with O-Ring (3).
Tightening torque figures
Front slider at crankcase lower part
M8

Chain tensioner assembly

• Fit chain tensioner (2).
• Fit screw (1).
Tightening torque figures
Chain tensioner on crankcase
M8, Microincapsulated screw
replacement
F1.53
15 Nm
15 Nm
15 Nm