Re- Assembling The Pumping Element Unit And The Bottom Valve - Husqvarna TC 449 2011 I.E. Workshop Manual

1 2
Workshop Manual Ed. 03-2012
FRONT SUSPENSION
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
• Mount the stop ring ( 11 ) using a small flat- tip screwdriver, checking it fits
perfectly into its groove and being very careful not to scratch the stanchion
tube.
1 1
• Re- assemble the dust seal ( 12 ) in its seat, pressing it home with your
hands.

Re- assembling the pumping element unit and the bottom valve

3 0
• Insert the pumping element rod ( 32 ) into the body ( 30 ).
3 2
In both pumping elements there is a sealing segment; before the
assembling make sure that it is not worn or damaged. Replace if
necessary. Take great care and if necessary use a small flat- tip
screwdriver to help the pumping element piston into the sleeve.
Insert the piston without any interference.
I.42