Husqvarna TC449 Workshop Manual page 263

5
7
8
10
1 edition (08-2010) _Rev. 11-2010
st
REAR SUSPENSION
- Loosen the two screws (5) using an 8 mm wrench, and remove rear brake
hose support (6) to slide out the pin (7).
6
H006186
- Using a 17 mm wrench, loosen nut (8) and remove pin (7) on the other side.
H006188
H006187
- Using a 10 mm Allen wrench, loosen pins (9) and remove swinging arm (10).
9
H006189
10
J.7
H006190